fbpx

Tag: frisket

Posted on

Monday Morning Art School: neat lines in watercolor

Sampler on Arches natural cold-pressed paper: a straight-edge was used for the straight lines, and the curves were drawn freehand. An ultramarine blue wash was laid over the mask, and a glaze of cadmium yellow was added after the mask was removed. Where it is still pink, the masking fluid is still in place. (All photos courtesy Michael Prairie.)

I have an aversion to frisket, or masking fluid, for watercolor. I’m unable to apply it elegantly. It wrecks brushes, leaves lumpy marks, and in general always seems like more trouble than it’s worth. Instead, I wet my paper carefully around the items to block out and then apply the paint using capillary action to direct it. That has its problems as well, so when Michael Prairie shared this method of applying frisket using an old-fashioned ruling pen, I was gobsmacked. (Mike’s an engineer, so it’s no surprise that he found a solution to this technical problem.) Without further ado, I’ll let Mike explain it:

Masking fluid mixed with a dab of quinacridone magenta

I had my father’s old ruling pen (he was a machinist and did some mechanical drawings). It was beat up a bit, so I tuned it up. Here are a couple useful links that I found, one of which really helped me tune the tip:

 How to use a ruling pen

 Steel ruling pens 

I can tint the fluid with a bit of watercolor pigment, and it hasn’t stained the paper. Some fluid is available in blue, but this lets you use different colors if you want.

The ruling pen works well with the watercolor paint itself. It is a great way to paint long lines of uniform thickness.

Ruling pen dipped in masking fluid, and the outside of the tines wiped dry.

Dipping the tip in thick masking fluid and wiping the excess off outside of the channel works well, but with thinner watercolor paint it tends to wick out of the channel. For that, I found I can load the pen with a loaded watercolor brush by scraping it across the edge higher in the channel. I also got an eye dropper to load the pen, and that works well.

For using a straightedge to draw lines, the edge should be lifted above the paper so the fluid or paint does not wick under the edge. Some straightedges are designed with a notch (or a rabbet in woodworking parlance) for “inking,” but a couple layers of masking tape set back from the edge will do the trick.

Ruling pen filled with juicy ultramarine blue with an eyedropper (to keep the outside of the pen dry).

The ruling pen can be used freehand as well. With the tips tuned so they are sharp and parallel, the line will follow the direction of the two edges on the tip. If the pen is held without rotating the handle, the line will be straight, but if the handle is rotated while drawing, it can be steered to make smooth curves.

Some people use nibs (from fountain pens). I haven’t tried that, except for a crude nib I made with a plastic drinking straw. It worked okay for scrubby applications of masking fluid.

I ruined an old paintbrush by not dipping it in Dawn dishwashing soap first-and I don’t know what the soap will do to the paint if residue is left behind.

I also tried some silicone brushes and found that they were good for dropping small semi-controlled blobs of masking fluid and moving it around into desired shapes, but they don’t come close to what I can do with a ruling pen for straight lines.

Sampler on Strathmore Bristol smooth sketchbook paper, i.e., hot-pressed.

You can get a ruling pen at Dick Blick, or a cheaper one at Amazon, but not all drafting tools are created equal. I didn’t want a cheap knock off, so I went to ebay where I found a used Staedtler Mars one for eleven bucks including the shipping. That means I will find my old one shortly, right?

Reserve your spot now for a workshop in 2025: