fbpx

Category: easel

Posted on

An easel solution to an oversize problem

I saw a great retrofit of a Guerrilla Painter Flex Easel last year and have been meaning to try it. No time like the present!

A hacksaw and a file will achieve a lot.
The organizers at Cape Elizabeth Paint for Preservation give us 2.5 days to do one painting. In return, they want us to paint big. I like painting big, so I’m happy to oblige. The trouble is, with the exception of the Gloucester easel, most plein airsetups are meant for fairly small work. I have a Gloucester easel, but it is missing a part. I can balance a 20X24 board on my pochade box using clips, but that’s the absolute limit. And canvases need better support than do boards.
I’ve narrowed it down to three possible sizes, depending on how intrepid I feel and how the weather looks—36X36, 24X30, or 20X24. I’ve packed my big brushes and lots of extra paint. The only issue was working up a field easel that could accommodate big panels without blowing away.
My easel before I hacked at it. That’s an en plein air pro shelf on the tripod. Very useful.
Tara Will is a fantastic pastel painter from Maryland. She works large and loose in the field, using a modified Guerrilla Painter 3001 No.17 Flex Easel. This is basically an aluminum head that fits on a camera tripod. I have one, and it’s a good piece of equipment, but it is limited. It only extends to 20”. Like all Guerrilla Painter tools, though, it’s rock solid.
Hacksawing the easel apart.
Tara sawed hers in half, inserted a piece of steel strip metal in the gap and locked the whole thing down with set screws. Genius! I’ve wanted to do something similar ever since I saw it. The only issue was to find a mending plate or metal strip to fit.
I stopped at two hardware stores, a marine store and a shipyard, with no luck. I went home, discouraged. My husband suggested one more trip, to Rockport Steel, which fabricates huge things like lobster boats and dock ramps. A fellow named Tim took time off and milled me a ½”X24” flat plate while I waited. It turns out that he is a darned good artist, judging by his work hanging in the office.
The steel flat strip fit perfectly.
From there it was a simple matter of cutting the aluminum stem in half with a hacksaw. Two extra screws from a Testrite easel easily locked the flat bar down. The screws were slightly too long to clear the canvas, so I cut them down with a bolt cutter. I think Tara’s might lock from the back, but no longer remember.
 It’s a mite wobbly when fully extended, and I don’t know yet how difficult it will be to adjust the set screws on the fly. Only field testing will tell me if it will work.
I have spare screws on hand for my Testrite classroom easels. They fit perfectly in the groove and locked the steel flat strip down securely.
Solid enough for field painting? Only time will tell.

Meanwhile, Bobbi Heathtexted me, “Do you want to use my Gloucester easel?” Well, I thought, I just spent half a day tinkering with this thing and I’d love to see if it actually works…


And then, on second thought, I answered, “heck, yeah!” When the pressure’s on, I’d rather use an old reliable tool than a new contraption.
Posted on

You can never have too many easels

My super-lightweight pochade box has served me well, but my field paintings have grown in size. What’s next?
Still the best pochade box for intertidal zone painting. (Photo by Ed Buonvecchio)
Four years ago, I made myself a super-lightweight pochade box. The instructions are here; they’ve been viewed thousands of times and I still occasionally correspond with people interested in making a similar one.
I built this box because I had hiked down Kaaterskill Falls with a heavier, earlier kit and developed a Baker’s cyst from the tremendous pressure on my knee. I decided right there that a lighter painting kit was necessary for extreme plein air. When you hike in to your destination, a kit weighing more than a few pounds is uncomfortable and sometimes dangerous.
The box when new.
The box I made answered that problem very well. It is compact and at 18 oz., doesn’t add much to the weight of my checked baggage. Between trips, I slide it in a waterproof stuff sack and toss it in the freezer. It has traveled many, many miles with me by car and by airplane.
However, it’s no longer serving as well for my primary easel, because things have changed:
  1. The maximum size it holds without jury-rigging is 12X16, and that’s become almost the minimum size I paint these days.
  2. The incessant wind along the coast causes my box to thrum. (For this reason, I seldom use an umbrella these days, either.)
  3. Because it has no frame, it’s gotten somewhat deformed by traveling in my checked bag on airlines.
It’s gotten a little beaten-up from traveling in my checked bag.
Kirk Larsen looked at it in Parrsboro and suggested that I have it copied in carbon fiber. I talked to a boatbuilder last week. He thought that fiberglass would do just as well. He’s going to work one up for me, and then I’ll field test it and see how it works.
Meanwhile, Jennifer Johnson decided to make a box like mine, but her husband ordered the wrong binder. It was a fortuitous accident, because her box is both smaller and stronger than mine. It pairs up perfectly with her Mabef M-27 field easel without any drilling or special machining. Larger canvases might be a stretch, but a clip should hold them steady. Weights can be hung as needed.

Jennifer Johnson’s box is in some ways superior.
I’ve had an earlier version of this Mabef field easel for about twenty years. I heartily recommend it to students as best value for money. Adding the $30 paint box is an elegant solution to the problem of a palette.
Or, you can use Victoria Brzustowicz’ simple solution. She hinged two aluminum baking sheets from the Dollar Store together with a strip of duct tape. Open, it’s a paint box; closed, it goes in a plastic bag in the freezer. It cost her all of $2.
Victoria Brzustowicz’ $2 solution. (Photo courtesy of Victoria Brzustowicz.)
Meanwhile, I’m packing for Cape Elizabeth Paint for Preservation 2018. They want us to paint big, so I’m reviewing my collection of older, heavier easels to see what will suit. If you’re in Portland this weekend and want to stop by, I’ll be at Fort Williams Park.
I’ve got one more workshop available this summer. Join me for Sea and Sky at Schoodic, August 5-10. We’re strictly limited to twelve, but there are still seats open.